.png.c9b8f3e9eda461da3c0e9ca5ff8c6888.png)
Equipment List
Tianyi Gateway Meizu Router (Old Russian Firmware) network cables
Routing Mode 1
Since the current optical cat supports wifi function, the router has been largely omitted. However, since the WiFi power of Lightmao is relatively small, sometimes we need to add a router. Today, let’s see how to add a router.
Based on traditional broadband dialing method (common for new and old optical cats)
Let’s take a look at the line connection first optical cat gigabit port ———— routing WAN port
Then log in to the router, configure the Internet access method to PPOP dialing to fill in the broadband account and password, and save it.
It should be noted that if telecom users are configured well, they need to call manual customers to activate it.
Series connection method based on optical cat routing (suitable for Xinguang cat)
If your optical cat supports WiFi function, you can think of it as a router at this time. (To put it bluntly, combine cat and router into one)
At this time, we can connect to the router (secondary router) in the simplest way
First look at the line
Just set the router's Internet access method to dynamic IP!
Precautions
If you have already set up dial-up Internet access, please plug the optical cat port to the 100-megapixel port or IPTV port, because the gigapixel port is already occupied. Modify the DHCP server address of your router and do not conflict with Guangmao's 192.168.0.1/192.168.1.1.